Product information
A 5-stage commercial reverse osmosis (RO) water purification plant rated for 500 liters per hour (LPH) of purified output — sized for continuous, higher-volume use in factories, offices, restaurants, bottled-water operations, and other commercial or institutional settings where a household RO unit isn't enough. The 5-stage layout is the standard commercial configuration: sediment and carbon pre-filtration ahead of the RO membrane stage, with a post-carbon polishing stage after it.
No price or physical specifications (weight, dimensions, pump/electrical rating) are set yet — none were provided, and this is a large enough system that guessing at them isn't a reasonable substitute for the real sourced numbers. Fill those in from the actual unit before publishing.
| Stage 1 — Sediment filter | Removes sand, silt, rust, and larger suspended particles |
|---|---|
| Stage 2 — Granular activated carbon (GAC) | Removes chlorine, odors, and organic compounds |
| Stage 3 — Carbon block (CTO) | Further taste/odor polishing; protects the membrane from residual chlorine |
| Stage 4 — RO membrane | The core stage — removes dissolved salts, heavy metals, bacteria, and viruses at a molecular level |
| Stage 5 — Post-carbon polishing | Final taste conditioning before the water reaches the point of use |
Reaching 500 LPH of continuous output takes more than a single under-sink cartridge set — commercial-scale RO plants at this capacity typically run a booster pump ahead of the membrane stage and multiple membrane elements arranged in parallel, mounted on a frame rather than fitted under a counter. Actual output depends on feed water pressure, temperature, and total dissolved solids — the 500 LPH figure is the plant's rated capacity under standard test conditions, not a guarantee under every feed-water condition.
| Rated output | 500 LPH (liters per hour) |
|---|---|
| Filtration stages | 5 |
| Intended use | Commercial / industrial |
A commercial plant at this scale needs an adequate feed water supply and pressure, an electrical connection for the booster pump, and space for the unit (plus a storage tank, if the installation calls for one). Pre-filters (the sediment and carbon stages) generally need more frequent replacement than the RO membrane itself, and actual replacement intervals depend on feed water quality.
Keep browsing
Price on request
Price on request
Price on request